Shimnao E7000 2019

E-bike instrumentation that does not turn on or suddenly turns off what happens and how to solve the problem, e-bike display that turns off what happens and how to solve the problem, your e-bike display suddenly turns off or not it turns on? here's everything you need to check and know to fix the problem


If your e-bike's control unit or instrumentation suddenly fails to turn on or turns off, there may be several possible causes. Here are some of the most common reasons and their solutions:

Power problems: Check that the battery is charged and correctly connected to the e-bike. Make sure the connector is fully seated and that there are no damaged or corroded wires. Also check if there are fuses on the fuel system and see if they are damaged.

Circuit Breaks: There may be a damaged wire or disconnected connection in the electrical system. Check all cables and connections, making sure they are secure and undamaged.

Ignition Switch Problems: If your e-bike has an ignition switch, it may be faulty or damaged. Try to check if the switch is working properly or if there are contact problems. If so, you may need to replace the switch.

Control unit problems: The control unit may be faulty or have internal connection problems. If possible, try resetting the control unit to its default settings. If the problem persists, the drive may need to be replaced.

Overheating: If the Control Unit or other components overheat, they may automatically shut down to prevent damage. Make sure the e-bike is not used in conditions that could cause excessive overheating, such as prolonged steep climbing.

Software problems: Some e-bikes use software to control functions. If there is a problem with the software, it could cause the control unit to malfunction. Check if there are software updates available for your e-bike model.

Sensor failures: Many e-bikes use sensors to detect pedaling, speed or other information. If one of these sensors is faulty, it could cause problems in the control unit. Check if the sensors are working properly.

If you are not sure how to deal with the problem yourself, it is advisable to contact an electric bicycle technician or the dealer where you purchased the e-bike.

Fiddling with the electronics of e-bikes without the appropriate knowledge could cause further damage.



If you have other curiosities you can write to: This email address is being protected from spambots. You need JavaScript enabled to view it.